Instructions

Thank you for using the SOHO Access™ EDIT system.
Before you begin please review the instructions below.

1. Begin by selecting an enclosure sizes.
   
     You can change enclosure sizes at any time.
   
   
2. Next select a cover style.
   
   
   
3. Now you can begin adding modules.
   • Click on a category heading on the right side to display available modules.
   • Then to place them in the enclosure, click on the module image.
   
      Modules may be placed both horizontally and vertically.
   
   • Just drag the module to the desired position or press the "delete" key to remove a module.
   
   
   
4. Repeat step 3 until you are satisfied with your enclosure layout.
   
   
5. Lastly, click on the "Generate Bill of Materials" link to view a detailed list of your selections along with additional information or print the browser page as is. (Click here if you are having problems print your enclosure layout.)