Bridging Clip
Bridging Clip |
 |
| 1127-A1 |
66 block bridging clip |
|
Dimensions: |
0.5"W x 0.25"H |
|
|
 back to top
Capacity Expanding Block Adapters
These can be installed on every row but not side by side on a 66 connecting block to expand capacity. This adapter is not for use on Cat 5 rated 66M1-50 blocks.
| • |
Provides additional connections without interfering with already connected wires |
| • |
Provides positive insulation from one row to the adjacent row |
| Capacity Expanding Block Adapters |
|
| 183A3 |
66 block adapter, 1 single quick clip |
|
|
| 183A2 |
66 block adapter, 1 double quick clip |
|
|
back to top
Covers
For use with 66B and 66M connecting blocks
| • |
Self-extinguishing transparent plastic |
| • |
Snaps on for convenience |
Protective Covers |
|
| 66BC6 |
Transparent cover for 6 x 50, 66B blocks |
|
Dimensions: |
12.63"H x 3"W x 0.36"D |
|
|
| 66MC-4 |
Transparent cover for 4 x 50, 66M blocks |
|
Dimensions: |
10"H x 2.3"W x 0.29"D |
|
|
For use with 66M connecting blocks
| • |
Self-extinguishing transparent plastic |
Hinged Covers |
|
| 031709-97 |
Hinged Cover |
|
Dimensions: |
10"H x 2.26"W x 0.5"D |
|
Colors: |
Orange = (97) |
|
|
back to top
66 Block Apparatus Boxes
Used to terminate and fan out horizontal distribution cable
| • |
Furnished with a snap-on cover, distribution rings and mounting hardware |
| • |
These offer greater flexibility where space is limited |
Apparatus Boxes |
|
| A115C1 |
Fits one 4 x 50 or 6 x 50 block |
|
Dimensions: |
17.56"W x 5.4"H x 2.7"D |
|
|
| A115D1 |
Fits two 4 x 50 or 6 x 50 blocks |
|
Dimensions: |
17.56"W x 9"H x 2.7"D |
|
|
back to top
Cable Management
Cable management equipment is molded of durable self-extinguishing thermoplastic, making it durable, lightweight and easy to handle.
back to top
Designation Strips
| • |
Designated for use on most 66M or 66B type connecting blocks to identify the circuits terminated on the block |
| • |
Strips are installed by snap-fitting to the side of the block |
Designation Strips |
|
| D10 |
Designation strip for 66M connecting block |
|
|
| D13 |
Designation strip for 66B connecting block |
|
|
back to top
Test Apparatus Connector
| • |
Provides a fast, safe access to any pair of quick-clip contacts in a 66-type block |
| • |
The TAC (test apparatus connector) grips the contact firmly to prevent annoying disconnection from the line being tested |
Test Apparatus Connector |
|
| 284-1 |
Apparatus test connector |
|
|
back to top
Terminating Tools
The 814B impact tool is designed for termination of 22-26 AWG station wire on products with 110 IDC type terminations. The installer needs only to place the wire in position, set the tool over the split terminal and with slight pressure push the wire into the terminal. The cutter will trigger automatically at just the right point and does not require the installer to cut off the excess wire. An adjustment screw for varying the spring tension, combined with an indicator point found at the large end of the handle, allows control of the impact to accommodate variation in wire sizes and thickness of insulation.
| • |
Spring loaded feature provides consistent connections |
| • |
Replacement blades available for 110 and 66 clip style terminations |
back to top
|
