home
products solutions distribution about suttle contact us site map
DSL Line Conditioners
Products > DSL Line Conditioners > DSL Test Units
dsl wallmount
FlushMount


DSL TEST KIT

The Suttle DSL Test Unit allows for an active DSL line to be tested for POTS (voice) verification without interfering with the DSL service connection The hand-held device has an RJ-14 modular jack for the input connection. The input can be made with a double-ended modular cord or with a universal test cord equipped with a modular plug on one-end and test clips on the other as used with a typical Butt set.

The connection for the testing is provided via two RJ-14 modular jacks labeled "Non-Filtered" for the DSL port and "Filtered" for the POTS port, or through the test access point terminals for use with a test cord.

Features:

* Provides testing without interfering with the DSL connection
* Available with test cords of varying length




DSL Test Kit

SE-DSLTest
DSLTEST-1
DSL Test Kit
DSLTEST-1 DSL Test unit image
Dimensions:
3.61"L x 1.84"W x 0.85"H  
DSLTESTKIT1 DSL Test unit with 1 ft. test cord
DSLTESTKIT3 DSL Test unit with 3 ft. test cord
DSLTESTKIT7 DSL Test unit with 7 ft.test cord
DSLTESTCORD1 1 ft. test cord
DSLTESTCORD3 3 ft. test cord
DSLTESTCORD7 7 ft. test cord



Home | Products | Solutions | Distribution | About Suttle | News | Contact Us Suttle © 2007 All Rights Reserved