| |
|
Product Description:
The switch jack from Suttle allows two providers' service to be controlled at the first jack in series through a simple, customer-operable switch. This jack eliminates the need for service truck rolls and jack re-wiring when the service is changed by the home owner. Intended for daisy chained retrofit applications. |
Application:
This jack is designed for a competitive service provider to distribute voice service via a residential gateway (i.e., EMTA, or phone adapter) through a home's existing wiring. The jack must be terminated at the demarcation point where the incoming wire enters the customer's premise (first jack in series). The incumbent service provider's incoming wires are terminated to the blunt cut leads using the butt splice connectors. Premise wires to the screws on the back of the terminal block. All jacks connected in series from this jack will be controlled through this switched jack.
Single port option (2-3001S-xx)
plug an EMTA into jack to feed all jacks in series
Dual port option (2-1001S-xx)
plug an EMTA into one port, feeds service to other port and all jacks in series
Product Features:
- Access controlled from front of jack with switches for both lines 1 & 2.
- Wire it once - no rewiring required if service turned back to incumbent.
- Switch can be performed by customer.
- Switch is inset 0.05" below faceplate to avoid accidental switching.
- Available in single and dual port options.
- Customizable for your name/logo to reinforce your brand.
- Smooth, sleek design matches electrical faceplates.
Wiring Instructions:
- This switched jack must be terminated at the demarcation point where the incoming wire enters the customer’s premise (first jack in series).
- Terminate the incumbent service provider’s Incoming Wires to the blunt cut leads using the butt splices provided.
- Terminate the Premise Wires to the screws on the back of the terminal block. All jacks connected in series from this jack will be controlled through this switched jack.
- Switch on the front of the plate needs to be moved to whoever is providing service.
Product Specifications:
Contacts:
Terminals:
Contact Pressure:
Contact Resistance:
Insulation Resistance:
Current/Voltage:
Listed: |
-
-
-
-
-
-
-
|
Spring tempered phospher-bronze 0.018" diameter
50 microinch hard gold plating minimum
100 microinch underplate with sulfamate nickel
Binding Screws
100 grams minimum
5 milliohms maximum
500 megaohms minimum
125 VDC @ 2 amps
cULus (pending) |
Dimensions:
Ordering Information:
Part Number
2-3001S-xx
2-1001S-xx |
- -
- -
|
Description
Simplex switched jack, 4-conductor, screw terminals, 8 in. flying leads, filled splice connectors.
Duplex switched jack, 4/4-conductor, screw terminals, 8 in. flying leads, filled splice connectors. |
Literature:
Specifications subject to change without notice. Copyright 2005. Original: 9/04
|
