| |
 |
FIELD TERMINATION PRODUCTS
Terminator(R) Field Termination System
Providing an incredibly quick and easy field termiantion solution, the terminator system is a polish-free fiber termination system consisting of the Termination Universal Cleave Tool and Terminator Connectors.
The Terminator Universal Cleave Tool cleaves off the fiber at the ferrule tip of multimode ST, SC, and FC connectors, eliminating the need for polishing while maintaining continuous glass to the end of the ferrule.
| • |
The most efficient and consistent polish-free termination system in the industry |
| • |
The terminator is the only polish-free system that employs traditional uninterrupted glass to the ferrule tip |
| • |
Terminates with an exceptionally low dB loss |
| • |
25-year warranty when tested and installed by Suttle certified installers |
| • |
Crimp, cleave, and leave in three minutes or less |
| • |
No curing oven or poilishing required |
Terminator Tool
Universal
Terminator Tool |
 |
| ATCF-TR1-U |
Terminator Universal Cleave Tool. For use with Suttle terminator style connectors only. Use of any other connectors with this tool invalidates all warranties and may cause permanent damage to the tool.
|
|
back to top
|
|
| |
Terminator
Connectors (Multimode Only)
Suttle's Terminator connectors are designed specifically for use with the terminator tool. The connectors have multimode zirconia ceramic ferrules and are compatible with 250 or 900 micron buffered cables and 62.5/125 and 50/125 fiber:
| • |
Three step crimp securing buffer, optical fiber, strength member and jacket of cable
|
| • |
One step crimp when using 900 micron boot (distribution type fiber)
|
| • |
Terminator connectors for use with the universal cleave tool ATCF-TR1-U*
|
* Use of any other connectors invalidates all warranties
and may cause permanent damage to the tool.
|
Terminator System Connectors |
|
| ASTA-02-C-B-G |
ST
Connector, 250 Micron Buffer, Unjacketed
(Loose
Tube) |
|
| ASTA-02-C-D-G |
ST
Connector, 900 Micron Buffer, Unjacketed (Distribution-Type) |
|
| ASTA-02-C-T-G |
ST
Connector, 900 Micron Buffer, 3.0 mm Jacket |
|
| ASTA-02-C-P-G |
ST
Connector, 900 Micron Buffer, 2.5 mm Jacket |
|
| ASCA-TR-B-10 |
SC
Connector, 250 Micron Buffer, Unjacketed
(Loose
Tube) |
|
| ASCA-TR-D-10 |
SC
Connector, 900 Micron Buffer, Unjacketed (Distribution-Type) |
|
| ASCA-TR-T-10 |
SC
Connector, 900 Micron Buffer, 3.0 mm Jacket |
|
| AFCA-02-B-G |
FC
Connector, 250 Micron Buffer, Unjacketed
(Loose
Tube) |
|
| AFCA-02-T-G |
FC
Connector, 900 Micron, 3.0 mm Jacket OR Unjacketed
(Distribution-Type) |
|
back to top
Terminator Accessories/Kits
|
|
| ATCF-SY-QS |
Pre-loaded syringe with needles (200 connectors/tube) |
|
|
| ATCC-UNV |
Universal crimp tool, ratcheted, size 1-4 hex crimp cavities |
|
|
| AFTK-TR-U |
Express terminator universal termination kit. Contents include: universal terminator cleave tool, universal crimp tool, jacket stripper, buffer stripper (125-150 micron), kevlar scissors |
|
|
| AFTK-TR1-Kit |
Full terminator universal cleave tool. Contents include: universal terminator cleave tool, universal crimp tool, wipes, isopropyl alcohol, cleaning wire, dust blaster kit, continuity detector, inspection microscope |
|
|
back to top
|
|
|
