The Suttle VDSL2 NID Splitter is designed to provide POTS service with DSL technology. It’s ideally suited to handle robust ring-trip protection for non-zero cross ringers to eliminate video distortion due to pixelization. The splitter is unique with its single slot solution to fit inside various NIDS along with its tool-less technology. The toggle design allows three pair tool less voice distribution and one pair tool less data distribution. A key benefit to the toggles is the clear material used to allow the installer an open view of their connection.
New Products
NEW VDSL2 NID Splitter Module (649NV-48)
February 18th, 2011NEW SpeedStar™ SC Adaptor with Trap Door (STAR500SCGR-T-xx)
January 17th, 2011
The Suttle SpeedStar™ SC Adapter provides instant coupling of fiber connectors within a miniature housing. The integrated spring-loaded trap door automatically closes when a SC connector is not connected or is removed, shielding potentially harmful laser light. Its design enables the adapter to be installed into any SpeedStar™ faceplate or housing allowing for the product to be integrated into many different form factors and a variety of different architectures.
NEW SpeedStar™ OptoLock® Coupler (STAR-POF-03)
October 18th, 2010
The Suttle SpeedStar™ OptoLock® POF coupler provides instant coupling for bare Plastic Optical Fiber (POF) within a miniature housing. This POF coupler significantly quickens and simplifies the connection of devices in communications and infotainment networks. The design of the SpeedStar™ OptoLock® coupler enables the fiber to be cut and terminated to the exact required length on site, allowing even the most novice consumer to quickly and easily terminate the bare optical fiber.
NEW HomePNA Ethernet Bridge Master & Endpoint (CEM-2CMA, CES-2CMA)
June 11th, 2010
The Suttle HomePNA™ Coax Ethernet Managed Bridge Master and Endpoint enable service providers to offer triple-play services in an MDU by utilizing the existing coax infrastructure. The Master (CEM-2CMA) allows for the remote management of subscriber networks to administrate individualized service levels as well as minimize installation and support costs. It can control up to 61 Endpoints (CES-2CMA) each isolated with a secure connection to the master.
- Master Spec Sheet
- Master Online Product Info
- Endpoint Spec Sheet
- Endpoint Online Product Info
NEW HDMI over Single CAT5e Extender (H5EA)
April 5th, 2010
This HDMI 1.3 over Single CAT5e Extender increases your video/audio transmission distance up to 200ft (60m) in HDTV 1080i format, 130ft (40m) in HDTV 1080p format, and 65ft (20m) in HDTV 1080p with 36 bit color depth. With only one LAN cable the user can readily extend HDTV signal from an HDMI source to a distant display monitor including HDMI/DVI enabled TV sets or LCD PC monitors. Deep color video, DTS-HD or Dolby TrueHD audio, and HDCP supports and compatibility are all delivered with the H5EA. It includes two units, a transmitter and receiver unit. The transmitter unit captures the incoming HDMI/DVI signal and carries it through one CAT5e/6 cable to the receiver unit where is then outputted via HDMI to whatever device is on the other end.
